Offering thousands of standard industrial rubber products and innovative “low” and “high” tech custom elastomeric products.

(800) 657-0747

Rubber Parts Catalog^®.com

DeltaFlex

VIBRATION CONTROL

Print This Page Email This Page Bookmarks Bar

LORD Square-Bonded Rubber Bushings

Compression Load Range: 700 - 5000 lbs (3,114 - 22,241 N)

"Absorption of shock, attenuation of noise, reduction of wear and elimination of lubrication..."

LORD Square-Bonded Bushings are used in applications where the absorption shock, attenuation of noise, reduction of wear and elimination of lubrication is required.

Square-Bonded Bushings accommodate angular movement and isolate vibratory disturbances in heavy equipment. These bushings combine a torsional spring with an elastomeric pivot and isolator. They provide positive torsional positioning and pivot action under the most demanding operating conditions.

Typical Applications

Wheel suspensions
Vibratory feeders
Mobile power equipment
Vibratory cable layers

Easy to install, the uncomplicated designs of the Center-Bonded and Square-Bonded Bushings provide initial economy, while the rugged elastomers and high strength bonding assure extended service life.

To select a Square-Bonded Bushing for your requirements, compute the static torsional load it must support. Select from the Tables, a bushing with static torque at 15° which is equal to or greater than the computed load.

Catalog

Application Analysis Forms

Lets Get Started!

Quick Quote

Ask A Question

Engineering Support

ENGINEERING ASSISTANCE - LORD Square-Bonded Rubber Bushings

DeltaFlex is committed to providing you with the best engineering support experience possible.

"Frequently vibration isolation problems require a system engineering analysis..." - Put us to work for you.

Thank you for taking the time to learn about DeltaFlex and our LORD Square-Bonded Rubber Bushings. Our applications engineer will help find the right solution for your application.

Our goal is to provide you with most efficient and effective engineering support. The more information you can provide upfront, the more diligent we can be in assisting you with your request.

We know that your time is valuable. So, we have filled-in some of the information for you.

Thank you...for putting DeltaFlex to work for you.

Engineering Support

Compute the static plus the dynamic torsional load. If this total load exceeds three times the static torque at 15°, select a larger size static torque rating part. Static radial load should also be computed and compared to the maximum static radial load listed above. Dynamic plus static radial load can also be three times loads listed above.

Specs

Specs Metric

Dimensions

Dimensions Metric

reset matrix

clear Part #	clear Max Radial Static Load (lbs.)	clear Radial Spring Rate (K rad) (lbs/in)	clear Static Torque @ 15* (lbs-in)
J-6450-19	700 lbs.	25000 lbs./in.	400 lb-in @ 15*
J-8203-1	1300 lbs.	40000 lbs./in.	1000 lb-in @ 15*
J-8203-19	1700 lbs.	60000 lbs./in.	1500 lb-in @ 15*
J-8203-31	1000 lbs.	30000 lbs./in.	750 lb-in @ 15*
J-8203-35	1700 lbs.	100000 lbs./in.	5200 lb-in @ 15*
J-9832-8	2500 lbs.	70000 lbs./in.	2700 lb-in @ 15*
J-9832-11	5000 lbs.	160000 lbs./in.	5200 lb-in @ 15*

reset matrix

clear Part #	clear Max Radial Static Load (N)	clear Radial Spring Rate (K rad) (N/mm)	clear Static Torque @ 15* (N-mm)
J-6450-19	3114 N	4378 N/mm	542 N/mm @ 15*
J-8203-1	5783 N	7004 N/mm	1335 N/mm @ 15*
J-8203-19	7562 N	10506 N/mm	2033 N/mm @ 15*
J-8203-31	4448 N	5253 N/mm	1016 N/mm @ 15*
J-8203-35	7562 N	28016 N/mm	7046 N/mm @ 15*
J-9832-8	11121 N	12257 N/mm	3659 N/mm @ 15*
J-9832-11	22241 N	28016 N/mm	7046 N/mm @ 15*

reset matrix

clear Part #	clear A (in.)	clear B (in.)	clear C (in.)	clear D (in.)	clear E (in.)	clear F (in.)	clear G (in.)	clear H (in.)	clear I (in.)	clear J (in.)
J-6450-19	1.75 in.	2.62 in.	0.63 in.	1.00 in.	1.17 in.	1.62 in.	1.75 in.	0.19 in.	0.72 in.	0.09 in.
J-8203-1	2.38 in.	3.25 in.	1.38 in.	1.62 in.	2.15 in.	2.25 in.	3.00 in.	0.19 in.	1.44 in.	0.09 in.
J-8203-19	2.38 in.	3.25 in.	1.38 in.	1.62 in.	2.15 in.	2.25 in.	3.00 in.	0.19 in.	1.44 in.	0.09 in.
J-8203-31	2.38 in.	3.25 in.	1.39 in.	1.62 in.	2.15 in.	2.25 in.	3.00 in.	0.19 in.	1.44 in.	0.09 in.
J-8203-35	2.40 in.	3.25 in.	1.39 in.	1.62 in.	2.15 in.	2.25 in.	3.00 in.	0.19 in.	1.44 in.	0.09 in.
J-9832-8	3.40 in.	4.00 in.	2.01 in.	2.53 in.	2.50 in.	3.25 in.	3.75 in.	0.25 in.	2.13 in.	0.09 in.
J-9832-11	3.42 in.	4.00 in.	2.01 in.	2.53 in.	2.50 in.	3.25 in.	3.75 in.	0.25 in.	2.13 in.	0.09 in.

reset matrix

clear Part #	clear A (mm)	clear B (mm)	clear C (mm)	clear D (mm)	clear E (mm)	clear F (mm)	clear G (mm)	clear H (mm)	clear I (mm)	clear J (mm)
J-6450-19	44.5 mm	66.5 mm	15.9 mm	25.4 mm	29.7 mm	41.1 mm	44.5 mm	4.9 mm	18.3 mm	2.3 mm
J-8203-1	60.5 mm	82.6 mm	35.0 mm	41.1 mm	54.6 mm	57.2 mm	76.2 mm	4.9 mm	36.7 mm	2.3 mm
J-8203-19	60.5 mm	82.6 mm	35.0 mm	41.1 mm	54.6 mm	57.2 mm	76.2 mm	4.9 mm	36.7 mm	2.3 mm
J-8203-31	60.5 mm	82.6 mm	35.0 mm	41.1 mm	54.6 mm	57.2 mm	76.2 mm	4.9 mm	36.7 mm	2.3 mm
J-8203-35	61.0 mm	82.6 mm	35.0 mm	41.1 mm	54.6 mm	57.2 mm	76.2 mm	4.9 mm	36.7 mm	2.3 mm
J-9832-8	86.4 mm	101.6 mm	51.0 mm	64.3 mm	63.5 mm	82.6 mm	95.3 mm	6.4 mm	54.1 mm	2.3 mm
J-9832-11	86.9 mm	101.6 mm	51.0 mm	64.3 mm	63.5 mm	82.6 mm	95.3 mm	6.4 mm	54.1 mm	2.3 mm