LORD Rubber Lattice Mounts

Part # J-4557-12

LORD Lattice Mounts are recommended for applications where disturbing frequencies are as low as 6 Hz. Their lattice design provides a soft vertical spring rate combined with lateral stability. Typical applications - shaker screens, sifters, rubber mills, air compressors and large engines & generators.

Additional Images

RUBBER-PARTS-CATALOG-DELTA-FLEX-LORD-CORPORATION-VIBRATION-ISOLATER-Machinery-Mounts-LATTICE-MOUNT-J-4557-12 RUBBER-PARTS-CATALOG-DELTA-FLEX-LORD-CORPORATION-VIBRATION-ISOLATER-Machinery-Mounts-LATTICE-MOUNT-J-4557-12 RUBBER-PARTS-CATALOG-DELTA-FLEX-LORD-CORPORATION-VIBRATION-ISOLATER-Machinery-Mounts-LATTICE-MOUNT-J-4557-12 RUBBER-PARTS-CATALOG-DELTA-FLEX-LORD-CORPORATION-VIBRATION-ISOLATER-Machinery-Mounts-LATTICE-MOUNT-J-4557-12
Lets Get Started!  

Quick Quote
Ask A Question
Engineering Support

Max Static Load 750 lbs. / 3336 N
Deflection 0.50 in. / 12.7 mm
Weight/ea. 9.2 lbs. / 4.2 kg
Part No. J-4557-12 | J455712
Manufacturer LORD Corporation
Part Category Vibration Control
Part Section Machinery Mounts
Part Type Lattice Mount - Type I
Part Status
Call +1 800 657-0747 or use the
webform to the right on this page
Part Alternative
Call +1 800 657-0747  or use the
webform to the right on this page

 

Catalog Page No.
Catalog Section Page No.
Rubber Parts Catalog Machinery Mounts Page 6
LORD PC7000 Plateform Mounts Page 40
LORD PC-2201m Plateform Mounts Page 40

 

 

Dimensions Technical Drawing
Dimension Measurement Notes
A 12.00 in. / 304.8 mm  
B 10.38 in. / 263.7 mm  
C 8.25 in. / 209.6 mm  
D 2.75 in. / 69.9 mm  
E 5.00 in. / 127.0 mm  
F 3.25 in. / 103.1 mm  
G 4.06 in. / 85.9 mm  
H 3.50 in. / 88.9 mm  
J 0.76 in. / 19.3 mm  
M -- in. / -- mm  
K .500-20UNF-2B See Note - 3
Weight 9.2 lbs. / 4.2 kg Each
NOTES: Red figures are metric reference.
1 One hole centered in top plate
2 Two hole midway in top plate
3 Maximum permissible depth of thread engagement is 0.53"
***Notes only apply if called out in table***

 

 

Vibration Problems

LORD Machinery Mounts are specifically engineered to isolate vertical shocks and reduce transmission of structural noise through floors. If your application involves intermittent or continuous vibration frequencies above or below 600 cycles per minute, the follow applies -

  • Vibration frequencies above 600 cycles per minute, use LORD Chan-L Mounts
  • Vibration frequencies below 600 cycles per minute are involved, use LORD Lattice Mounts

Custom Designs

Customized designs and special elastomer compounds for specific problems are available. These may result in spring rates and dimensions other than shown.

A part’s listing on this website does not guarantee its availability.

 

Custom Parts

Our custom molding department can make a part just for your application.

Engineering

Would you like some assistance in selecting the right mount for your application?  Our engineering department can help.  Please call or use the webform below.  We will be glad to assist.

Not what you are looking for?

Our knowledgeable staff can assist you with whatever you need.  From Special Packaging, Overnight shipments to applications engineering. DeltaFlex is ready to help find a solution.

Engineering Assistance

"Frequently vibration isolation problems require a system engineering analysis..." - Put us to work for you.

DeltaFlex has the computer capability, as well as specialized programs, for analyzing engine/transmission combinations. The output from these analyses is a mounting proposal which optimizes performance over the complete range of operating speeds. This service is available to you upon request. If you require this type of engineering assistance please call 800.657.0747 we will be glad to assist you.

What is the impact of Vibration Control?

The biggest impact that vibration isolation can have, is with the end users of our customers products, more importantly their perception of the quality of those products.

Values states herein represent typical values as not all test are run on each lot produced. For formalized product specifications or specific product end uses, contact Customer Service 262.632.2345.

A part’s listing on this website does not guarantee its availability.